Basic Info.
Specification
107× 1.2× 16mm
Product Description
Product Introduction
Metal & Stainless Steel (INOX) Cutting Wheels | 4-1/2-Inch x .045-Inch x 7/8-Inch
Extremely thin .045-inch wheel design for fast, straight cuts with minimal burr
4-1/2 inch Angle Grinders & other 4-1/2 inch grinders with standard 5/8" spindle thread
These Flat Cutting Wheels are made from Brown Fused Aluminum Oxide, allowing for a tough, high strength, dense and high temperature proof material which is engineered for reducing heat build up when cutting Stainless Steel (INOX). Our 60 Grit Size allows for a balanced material removal while leaving a smoother straight cut finish. This very hard cutting wheel is one of the hardest in the market and ideally suited for work cutting applications such as Stainless steel (INOX). Our long lasting and reliable bonding materials are ideally suited for cutting ferrous materials, stainless steel (INOX) and all other metal applications.
Safety Note: higher operating speeds can be an effective method of increasing productivity, but operating a cutting wheel at excessive speeds is hazardous and can lead to breakage. Please refer to your angle grinder safety instructions for further information.
Features of Cutting Wheel:
Plain weave mesh-the biggest bright spot
1.Better toughness
2.Increased sharpness
3.Increased durability
4.Increased safety factor
5.More beautiful appearance
Double mesh design :Sharp and wear --- resistant
Ultra-thin 1.2 mm:High speed cutting
High quality resin:Safe and durable, not easy to drop sand
Improved refined sand:Selected raw materials, not easy to break
Stainless steel ring:Firm and not fall off
Available Sizes| Shape | mm | inches | MAX.R.P.M
80m/s | PCS/CTN |
TYPE 41
| 105x2.0x16 | 4x3/38x5/8 | 15200 | 400 |
| 105x2.5x16 | 4x3/32x5/8 | 15200 | 400 |
| 107x2.0x16 | 4x3/38x5/8 | 15200 | 400 |
| 107x2.5x16 | 4x3/32x5/8 | 15200 | 400 |
| 115x2.0x22.2 | 4 1/2x3/38x7/8 | 13300 | 200 |
| 115x2.5x22.2 | 4 1/2x3/32x7/8 | 13300 | 200 |
| 115x3.0x22.2 | 4 1/2x1/8x7/8 | 13300 | 200 |
| 125x2.0x22.2 | 5x3/38x7/8 | 12200 | 200 |
| 125x2.5x22.2 | 5x3/32x7/8 | 12200 | 200 |
| 125x3.0x22.2 | 5x1/8x7/8 | 12200 | 200 |
| 150x2.0x22.2 | 6x3/38x7/8 | 10200 | 200 |
| 150x2.5x22.2 | 6x3/32x7/8 | 10200 | 200 |
| 150x3.0x22.2 | 6x1/8x7/8 | 10200 | 200 |
| 180x2.0x22.2 | 7x3/38x7/8 | 8500 | 200 |
| 180x2.5x22.2 | 7x3/32x7/8 | 8500 | 200 |
| 180x3.0x22.2 | 7x1/8x7/8 | 8500 | 100 |
| 230x2.5x22.2 | 9x3/32x7/8 | 6650 | 100 |
| 230x3.0x22.2 | 9x1/8x7/8 | 6650 | 50 |
| TYPE 42 | 115x3.0x22.2 | 4 1/2x1/8x7/8 | 13300 | 200 |
| 125x3.0x22.2 | 5x1/8x7/8 | 12200 | 200 |
| 150x3.0x22.2 | 6x1/8x7/8 | 10200 | 200 |
| 180x3.0x22.2 | 7x1/8x7/8 | 8500 | 100 |
| 230x3.0x22.2 | 9x1/8x7/8 | 6650 | 50 |
| 230x3.5x22.2 | 9x9/64x7/8 | 6650 | 50 |
Can I visit your company? Can your company arrange transportation for me?
Yes, It is a great honor to invite you to visit our company. We will arrange our driver to pick you up. Where is your factory?
Located in Zhangqiu District, Jinan city, ShanDong, China. Do you provide samples ? is it free or extra ?
If you need them, we'll provide you samples for free. How many days for sampling?
7~10 days
Could I put my own logo on products?
Sure, customers' logo can be made If I have my thoughts, do you have person to design according to my concept?
Yes our design team is willing to do for you.
https://difengsheng.en.made-in-china.com/SAFETY GUIDEA. Safety Recommendations
- Wear protective goggles
- Wear protective gloves
- Wear ear protectors
- Wear dust respirator
- Observe safety recommendations
- No barehanded or hand-hold operation
- No wet grinding
- No side grinding
B. Mounting System
Never use Two different diameter flanges cutting or grinding, must always keep the two flanges with same outside diameter and support area.
C. Abrasive wheels conveying and storage
1. The abrasive grinding wheel and cut off wheel must be conveyed with complete package to avoid collision and vibration.
2. Store wheels in an area that is dry and protected against damage from impack, solvents (e.g. alkaline), high humidity, and extreme heat or cold.
3. Store wheels horizontally. Oblique or vertical storage will cause damage to the wheel, so does high pressure on surface.
4. Avoid direct contact with ground. Dampness isolating cusion board should be placed between wheel and the ground. Keep the distance between the cushion board and the ground 10-15cm, and the pilling height shall not exceed 1.5m.
5. Arrange wheels so that older ones will be chosen before new ones.
6. If they have been stored for over one year, the products must be used after the rotation intensity test and apperance check.
D. Mounting and working
1. Ensure that wheels are mounted before using:
- by qualified persons
- according to the manufacturer's instructions
- only on the machines from which they were designed
2. Before mounting a wheel:
- inspect and test it to ensure that it is safe to use
- check that it is marked to indicate the maximum speed at which it can be used
- turn off and lock out the machine
3. When mounting a wheel, make sure that:
- the machine spindle speed does not exceed the speed which marked on the wheel
- the wheel fits freely, but not loosely on the spindle
4. Use flanges that:
- are equal in diameter and have equal bearing surfaces
- are at least one-third the diamter of the wheel
- have bearing surfaces that are true and free from burrs
- are properly undercut (unless it is a single flange used with a threaded-hole wheel)
5. Where required, use blotters that are free of creases, folds and dirt. Blotters should be just larger than the flanges.
6. Tighten the clamping nuts just enough to hold the wheel firmly.
7. Don't let screws for inserted nut mountings touch the abrasive part of the wheel, use screws taht are just long enough to engage a sufficient length of thread.
8. Make sure that the protective hood is properly adjusted and secured, and that is encloses the wheel as closely as the work will permit.
9. Clean the bearing surfaces of the wheel, flanges and spindles so that the clamping pressure is evenly distributed.
10. Check the speed of the spindle to make sure that it is not too fast for the type and size of wheel.
11. Make sure that the hole in the wheel bushing is the right size for the spindle (neither too small nor too large)
12. Tighten the spindle and nuts just enough to keep the wheel from moving out of position between the flanges.
13. Do not use cutting wheels as grinding wheels.
Address:
1111#, 1-A7, Tangren Centre A, Mingshui Street, Zhangqiu District, Jinan, Shandong
Business Type:
Manufacturer/Factory, Trading Company
Business Range:
Chemicals, Tools & Hardware
Management System Certification:
ISO 9001
Company Introduction:
We are an international trading company specialized in selling abrasive tools and auxiliary materials. Our company covers a wide range of business. Difengsheng′s business covers the sales of abrasives such as brown, white and calcined fused alumina, black and green silicon carbide, glass beads, and abrasive products such as resin-bonded wheels, vitrified grinding wheels, flap discs, Alumina velcro disc, abrasive paper and belts, etc.
The abrasive industry of the company is growing, but also in order to be able to provide better services to customers in need. Expand business and domestic first-class abrasive materials and abrasives tools production enterprises in-depth cooperation, from the production source to produce a series of high-quality and inexpensive products.
Since the establishment of our company, we stick to the principle of "quality first, service first, continuous improvement and innovation to meet the customers" for the management and "zero defect, zero complaints" as the quality objective, we have been maintaining good cooperative relations with domestic industrial and mining enterprises. In the meantime, our products have been exported to more than 20 countries and regions including Japan, South Korea, Thailand, Russia, Germany and enjoy high reputation at home and abroad.
